Destiny apex 6100 Manual de usuario descargar pdf (Pagina 7)

If partitioning is not used or not available, all 8 data fields will contain the same value. Fields

for partitions not assigned to a User will display ‘D.’

Example: With 6 partitions assigned, partitions 1-4 Armed to Home, partitions 5-6 not

assigned, and partitions 7-8 Armed to Away, the message is

10ASHHHHDDAA0081(CR-LF)

5.3. Zone Status Messages

You can use your PC to query the panel concerning the status (open, closed, trouble, alert,

bypassed) of all zones, and to request the partition assignment of all zones. The panel will

respond with a Zone Status or Zone Partition Status message for all 96 zones. In addition, the

panel can be programmed to send System Notification Messages concerning zone status. (See

Notification Messages, section 5.6)

Zone Status Request

08zs004B(CR-LF)

The panel responds with a Zone Status Report.

Note: This message should be sent only when an initial connection is made with the panel. It

is not intended to be used as a ‘polling’ command. The panel can be programmed to send

System Notification Messages concerning zone status.

Zone Status Report

68ZS

D...

(CR-LF)

The panel sends this message in response to a Zone Status Request.

The data portion of this message is 96 characters long, one character for each zone in order.

Each character is the sum of all applicable status values, expressed in hexadecimal.using

ASCII characters 0-9 and A-F.

Status Values

• 0 Closed

• 1 Open

• 2 Trouble

• 4 Alert

• 8 Bypassed

Example: a Zone Status Report for a system in which Zone 1 is Open, Zone 2 is Open, in

Trouble, and Bypassed, and the rest Closed, would begin 68ZS1B00.…

Zone Partition Request

08zp004E(CR-LF)

Panel responds with a Zone Partition Report

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Destiny apex 6100 Manual de usuario Pagina 7