Destiny apex 6100 Manual de usuario descargar pdf (Pagina 50)

Sequence of Operation

System Sequence of Events

- Silence a Selected Keypad / Internal Speaker -

in Home/Night Modes

Arming the control panel to Home/Night mode will automatically silence the selected

speaker until five seconds after the control has been disarmed.

Note: The control panel will instantly restore the speaker to an

active state for any alarm activation.

1) The control is armed to Home/Night, sending an ON command to Control Channel 1.

2) Control Channel 1 is programmed to energize the on-board relay (Auxiliary Output 8).

3) The speaker to be silenced will be wired through the on-board relay normally closed (NC)

termainal.

4) When the on-board relay energizes the speaker wiring loop will open.

5) The control is disarmed, sending an OFF command to Control Channel 2.

6) Control Channel 2 is programmed to de-energize the on-board relay five seconds after dis-

arm, returning the speaker to an active state.

7) The control panel will send an OFF command to Control Channel 1 and de-energize the on-

board relay if any alarm activation should occur to ensure that the speaker is active.

Objective Equipment List

¨ Apex Destiny 6100 control panel,

rev. 8.05 or greater

¨ Apex RK36 or RKLCD keypad

When the control panel is armed in

the Home/Night mode, the selected

speaker is silent. The speaker

remains silent until after disarm.

This application allows a specific internal speaker in Home /

Night mode to be silent while others remain active.

Apex Technical Support 800-272-7937

Option 1

Page 4-11

- Application Note -

End User Convenience

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 76 77

Sin comentarios

Destiny apex 6100 Manual de usuario Pagina 50