Destiny apex 6100 Manual de usuario descargar pdf (Pagina 70)

Sequence of Operation

System Sequence of Events

Objective Equipment List

¨ Apex Destiny 6100 control panel,

rev. 8.05 or greater

¨ System Sensor Relay, A77-716B

- Arm to Away End of Exit Trigger -

This application can be used to provide an audible and / or visual

indication when the exit delay has expired and the control is armed.

After arming to Away, the exit countdown will begin. When the exit delay expires a relay output

will be given. The relay output will restore when the control is disarmed.

Provide an output relay that will

activate at the end of the arm to

Away exit delay.

1) Arming to Away activates Control Channel 3 which triggers Chain Group 1 to first energize

the on-board relay (Auxiliary Output 8) and then Auxiliary Output 1. The ground signal from

Auxiliary Output 1 is now available at the normally closed (NC) contacts of the on-board relay.

2) This signal will pass through to Zone 1 when the on-board relay is returned to its normally

closed position after the turn-off delay period (programmed same as the exit delay time).

3) Zone 1 is linked to Control Channel 5 so when it is tripped Auxiliary Output 2 will pull to

ground and energize the output relay.

4) When the system is disarmed Control Channel 4 will trigger Chain Group 2 to first

deenergize Auxiliary Output 1 and then the on-board relay. This will deenergize the output

relay returning it to its normal state.

Apex Technical Support 800-272-7937

Option 1

Page 5-1

- Application Note -

Miscellaneous

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 76 77

Sin comentarios

Destiny apex 6100 Manual de usuario Pagina 70