Destiny apex 6100 Manual de usuario descargar pdf (Pagina 56)

Sequence of Operation

System Sequence of Events

Objective Equipment List

Apex Technical Support 800-272-7937

Option 1

Page 4-17

¨ Apex Destiny 6100 control panel, rev. 8.05 or greater

¨ Apex RK36 or RKLCD keypad

¨ X-10 PRO Power Line Interface Module, PSC05

¨ X-10 PRO Incandescent Wall Switch Module, PLW01

To provide the end user

with a means of activat-

ing time controlled

channels that will operate

lights, applicances, etc.

ONLY when they are on

vacation.

Pressing the 1 and 7 keys on the keypad simultaneously will enter the control panel into a special

(vacation) mode. This mode will automatically activate certain designated lights/applicances

based on time of day. Pressing the 1 and 7 keys simultaneously again will exit the special

(vacation) mode returning the control panel to the normal daily scheduling.

1) Pressing the 1 and 7 keys simultaneously at the keypad will trip a Control Channel which will

trip an Auxiliary Output pin. The pin is wired to a zone contact.

2) The zone is programmed as a Sunrise/Sunset zone. The time of day Control Channels are

disabled when light, therefore tripping the zone creates a dark condition for the panel. This

enables the vacation channels to begin operating according to their programmed times.

Note: This application will NOT work properly if a photo cell is

being used to activate Control Channels through sunrise/

sunset commands.

- Vacation Mode -

- Application Note -

End User Convenience

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 76 77

Sin comentarios

Destiny apex 6100 Manual de usuario Pagina 56